Vinyl Roofing Explained: Pros, Cons and What Homeowners Should Know

vinyl roofing homerocketrealty

Searching for vinyl roofing HomeRocketRealty? You’re in the right place. This article explains vinyl roofing in plain language, so you can understand your options, ask the right questions and handle your home’s roof the smart way. Read it through and follow the steps, and you’ll avoid the common mistakes homeowners make.

Most people will think of tiled or shingle roofs. However not all roofs are sloped and you will often need a different material. Flat and low slope roofs are common in extensions, garages, modern houses and flats.

Knowing what vinyl roofing is and when it is best to use will help if you are buying, selling or maintaining. This guide will explain in simple terms what vinyl roofing is.

What Is Vinyl Roofing?

Vinyl roofing is typically a single ply membrane. It is a flexible waterproof sheet that goes over the roof. The seams are usually heat welded.

It is often referred to as a vinyl, PVC or single ply roof. Vinyl is different to vinyl cladding as it is for walls. Make sure you compare the correct products when looking at quotes.

Where Vinyl Roofing Is Best

Where Vinyl Roofing Is Best

Vinyl roofing is best suited for:

  • Flat Roofs – whether it be part of a house or extension.
  • Low sloped roofs – so water runs off slower.
  • Garages, porches and outbuildings.

Flats and commercial buildings with larger flat areas.

It is not usually the best for sloped or complex roofs. Tiling, shingles or metal would often be a better option. A professional will be able to advise you. Every roof is different.

If you had a family home with an extension with a flat roof. The old felt roof has started to leak around the edges and patching up has not worked. A roofer could remove the old roof and lay a new vinyl roof with heat welded seams. This would give a fully waterproof roof with no overlaps.

Benefits Of Vinyl Roofing

Benefits Of Vinyl Roofing
  • Fully Waterproof – The seams are heat welded meaning you get a fully waterproof roof. Great for flat roofs.
  • Lightweight – Vinyl membranes are quite light. This means less weight on the structure.
  • Reflective – Light coloured membranes can reflect more sunlight. Depending on your insulation this can be helpful in warmer climates.
  • Modern Look – A neat membrane and clean edge detail adds a modern look.
  • Warranties – Some manufacturers and installers offer warranties. These can vary greatly.

Disadvantages And Limitations

Disadvantages And Limitations

Quality of installation can be an issue. If the seams and edges are not welded correctly then there could be leaks.

Not suitable for all roof types.

  • It can be prone to damage. Sharp objects, lots of footfall or falling branches could cause damage.
  • Depending on the size of the roof, access, preparation and product the price can vary. Ask for a few written quotes.
  • It is a plastic (PVC). If this is important to you ask your supplier about how they dispose of and recycle.
  • These are not deal breakers but are things to ask good questions about.

Vinyl Roofing Vs Other Flat Roofing Options

Vinyl Roofing Vs Other Flat Roofing Options
OptionTypical strengthsThings to watch
Vinyl (PVC) membraneWelded seams, light, flexible, many colorsNeeds skilled installation; can be damaged by sharp objects
EPDM rubberSimple, widely used, flexibleSeams are usually glued rather than welded
Built-up or felt roofingFamiliar, multiple layersCan be heavier and need more upkeep
Liquid-applied coatingsGood for awkward shapesNeeds careful surface preparation

This is a general guide. Products and prices vary depending on the brand and area. Ask your roofer why they recommend one option for your roof.

Ask your contractor:

Installation

The usual process is:

  • A roof survey to check drainage, insulation and structure.
  • Preparation of the roof. Old layers may need removing/repairing. Surface cleaned and levelled.
  • Insulation and underlay added if required.
  • Membrane fitted with heat welded seams.
  • Edges, corners, vents and drains fitted.
  • Complete and offer advice on maintenance.

Ask your contractor:

  • How many vinyl/single ply roofs have you installed?
  • Can we see examples? Can we talk to previous customers?
  • What is covered in the warranty? Who provides it?
  • How will you deal with drainage?
  • Are you insured?

Roofing regulations and permits vary depending on your location. Check with your local authority.

Maintenance Tips

Maintenance Tips
  • Vinyl is not completely maintenance free.
  • Check once or twice a year and after heavy storms.
  • Ensure drains are clear of leaves and debris.
  • Try to only allow trained staff on the roof. If there are walkways use these.
  • Check seams and edges are not lifting, cracking or have gaps.
  • Gently clean with mild products recommended by your installer.
  • Small damage should be repaired early to stop water getting to the insulation.
  • Keep invoices, warranties and surveys. This will help when selling.

Buying/Selling A Home With A Vinyl Roof

Buying/Selling A Home With A Vinyl Roof

Roofs are a big consideration for buyers and inspectors. Flat or low sloped roofs will raise questions about how old it is, what it is made of and has it leaked?

When selling make sure you have all documents relating to installation, warranty and maintenance together. This will help reassure buyers and make the process run smoothly.

When buying ask:

  • When was it installed? By who?
  • Is there a transferable warranty?
  • Has there been any leaks or repairs?
  • When was it last checked?

Getting a professional roof inspection will help you understand the condition and future costs. If you are looking at homes with flat roofs or extensions a local agent like our team at HomeRocketRealty can help you know what to look out for.

Conclusion

Vinyl roofing can be a great, neat option for flat/low sloped roofs. If installed correctly it will provide a fully waterproof membrane with no seams. However it does rely on quality installation and sensible maintenance.

Ask for a few written quotes, ask detailed questions and compare vinyl with other options. If you are buying/selling keep good documents. Consider getting a professional inspection.

FAQ’S

What is vinyl roofing?

Most vinyl roofing is a single ply membrane made from PVC. It is a flexible waterproof sheet that is laid onto a flat/low sloped roof. The seams are commonly heat welded.

Is vinyl roofing good for flat roofs?

Vinyl roofing is a popular option for flat/low sloped roofs. Whether it is suitable for your home depends on your structure, drainage and budget. Ask a qualified roofer to check.

How long does a vinyl roof last?

It depends on the product, quality of installation, climate and maintenance. Refer to your written warranty and real examples.

How much does vinyl roofing cost?

It depends on the size of the roof, access, preparation, insulation and product. Ask for a few detailed written quotes.

Can I fit a vinyl roof myself?

It is best to leave to trained professionals. Preparation, welding and edge detail are important. Roofing can be dangerous.

Leave a Reply

Your email address will not be published. Required fields are marked *